TinyShield Proto Board 1

This proto board brings every one of the TinyShield signals out to a point that you can solder to. All of the signals are marked and are spaced with 2mm spacing, so a standard 2mm header can be used if desired.

• Ultra compact size and weight (smaller than a US Quarter!)
  • Square Version: 20mm x 20mm (.787 inches x .787 inches)
  • Circular Version: 20mm (.787 inches) diameter
  • Max Height (from lower bottom TinyShield Connector to upper PCB level): 2.81mm (0.111 inches)
  • Weight: TBD grams (TBD ounces)

Includes the following signals:

• Schematic (pdf)

• Eagle Design Files (on GitHub)

License

Design by TinyCircuits. All design files are released under the Creative Commons Attribution Share-Alike 3.0 License, see the following link for details: http://creativecommons.org/licenses/by-sa/3.0

All text above must be included in any redistribution or derived design

This project uses designs and concepts developed as part of the Arduino project and the LilyPad project. The TinyCircuits design files themselves (schematics, PCB and libraries) are not directly derived from these works' design files and have been created new, however the concepts and basic architecture behind the TinyDuino and TinyLily products are derived and we thank the hard work of the organizations below for their contributions to open-source hardware:

Original Arduino Uno Design by Team Arduino

LilyPad Arduino Design by Leah Buechley and Sparkfun Electronics

Please support the open-source hardware community